PS3 Jailbreak 4.11


PS3 Jailbreak 4.11 Released

After a long time we have great news for you that ps3 jailbreak 4.11 has been finally released  and that’s the reason why we didn’t update our website from long time. This time ps3 jailbreak 4.11 is supporting backup manager as other versions were not supporting that.  We wanted to let you know that this time ps3 jailbreak 4.11 will be for limited user and only few member can gain access it and after that we would finish this offer. We got this jailbreak from secret forum and we are not going to reveal and although you will have to perform the same steps as you did in other version.

How to Download PS3 Jailbreak 4.11

In order to download ps3 jailbreak 4.11 you will have to download it from given button below and once you will download then you will have to perform some steps and instructions. These steps are very easy and if you follow them properly then you can jailbreak your device in a few minutes.

 PS3 Jailbreak 4.11

Lets Jailbreak PS3 4.11

After download the PS3UPDAT.PUP file from above link you would have to perform some more steps and instructions to ensure that you jailbreak your device properly. There are some major steps that you would have to follow and they are given below.

PS3 Jailbreak 4.11 – Steps and Instructions

STEP 1: Plug a USB stick into your computer
STEP 2: Create a folder in the root of the USB stick called PS3
STEP 3: Create a folder inside the PS3 folder called UPDATE
STEP 4: Download PS3 Jailbreak 4.11
STEP 5: Run Downloader and start downloading PS3UPDAT.PUP file which will be downloaded on your desktop
STEP 6: Move PS3UPDAT.PUP to the directory UPDATE that you just created on the USB stick
STEP 7: Plug the USB stick into your PS3
STEP 8: Navigate to Settings Tab
STEP 9: Choose System Update
STEP 10: Choose Update via Storage Media
STEP 11: It will say it found Version 4.10-jb
STEP 12: Choose OK
STEP 13: Accept Conditions and Install Update
STEP 14: After less than a minute, your PS3 will update, beep 4 times then shut down.
STEP 15: Power up your PS3 (You will have to do it on the console and not by the controller)
STEP 16: Your PS3 is now jailbroken!

 

Posted by admin - March 22, 2012 at 12:19 pm

Categories: Uncategorized   Tags: , , , , , , , , , , , , , , , , , , ,

PS3 Jailbreak 4.10 – 4.10 PS3 Jailbreak


PS3 Jailbreak 4.10

As we all know that ps3 jailbreak 4.10 has been out and as usual cobra jailbroken firmware 4.10. He tweeted on twitter that he is working on firmware 4.10 cfw and we contacted him privately and got ps3 jailbreak 4.10. In ps3 firmware 4.10 Custom firmware a lot of things have been added which were not in previous versions. Dropbox Support also added in this firmware 4.10 custom firmware.

PS3 Jailbreak 4.10 Download

Well, you would have to download ps3 jailbreak 4.10 launcher tool in order to jailbreak the device and that you can get it from by clicking the download below.

 PS3 Jailbreak 4.10   4.10 PS3 Jailbreak

A launcher tool image below

 PS3 Jailbreak 4.10   4.10 PS3 Jailbreak

PS3 Jailbreak 4.10 Step by Step Guide

1- Download the PS3 Jailbreak of the Latest 4.10 Firmware
2- Now Copy the PS3UPDAT.PUP file that is downloaded on your desktop and Make New Folder in USB (FlashDrive).
3- Paste the files into PS3 Folder.Connect this USB Stick to PS3.
4- Now Upgrade your firmware version to 4.10-CFW

 

Posted by admin - February 12, 2012 at 9:44 am

Categories: 4.10 ps3 jailbreak, download ps3 jailbreak 4.10, ps3 jailbreak 4.10, ps3 jailbreak 4.10 downlaod, Uncategorized   Tags: , , , , , , , , , , , , , , , , , , ,

PS3 Jailbreak 4.0 – PS3 Jailbreak 4.00


PS3 Jailbreak 4.0 – PS3 Jailbreak 4.00

After long time PS3 Jailbreak 4.0 is finally out and available to download. Mostly people were anxious that when ps3 jailbreak will be out for download. PS3 Jailbreak required some steps and there are some instructions to jailbreak your device properly. Mostly people don’t follow the instructions and then blame to jailbreaking working principle. The Concept is same as we used when ps3 3.55 jailbreak was out by geohot. New hackers such as cobra also using the same technique. Cobra has built ps3 jailbreak 4.00 , most people say it is ps3 jailbreak 4.0 but actually it is ps3 jailbreak 4.00 , the new update from sony was 4.00 not 4.0. Well, you would have to perform some steps and instructions to jailbreak your device properly.

PS3 Jailbreak 4.0 – PS3 Jailbreak 4.00 Download

Definitely without downloading any file you will never able to jailbreak your device in such easy case. You can download it by clicking the download button below.

 PS3 Jailbreak 4.0   PS3 Jailbreak 4.00

Once you have downloaded it then you would need to perform some more steps and instructions.

PS3 Jailbreak 4.0 – PS3 Jailbreak 4.00 Steps and Instructions

  •  Plug a USB stick into your computer
  •  Create a folder in the root of the USB stick called PS3
  •  Create a folder inside the PS3 folder called UPDATE
  •  Download PS3 Jailbreak 4.00 by cobra
  •  Run Downloader and start downloading PS3UPDAT.PUP file which will be downloaded on your desktop
  •  Move PS3UPDAT.PUP to the directory UPDATE that you just created on the USB stick
  •  Plug the USB stick into your PS3
  •  Navigate to Settings Tab
  •  Choose System Update
  •  Choose Update via Storage Media
  •  It will say it found Version 4.00-jb
  •  Choose OK
  •  Accept Conditions and Install Update
  •  After less than a minute, your PS3 will update, beep 4 times then shut down.
  •  Power up your PS3 (You will have to do it on the console and not by the controller)
  •  Your PS3 is now jailbroken!

Posted by admin - January 6, 2012 at 8:16 am

Categories: jailbreak ps3, jailbreak ps3 4.0, jailbreak ps3 4.00, ps3 4.00 jailbreak, ps3 jailbreak, ps3 jailbreak 4.0, ps3 jailbreak 4.00, ps3 jailbreak download   Tags: , , , , , , , , , , , , , , , , , , ,

E3 Flasher Supporting Dual boot


E3 Flasher:

If you are not aware from the E3 Flasher then this thread will really going to help you regarding E3 Flasher. E3 Flasher is basically used to boot playstation 3 and it has many more functions such as downgrading your Playstation 3. Let’s suppose you want to reboot your firmware means to downgrade your firmware like from 3.73 or 4.00 to 3.55 or 3.56.

Today the E3DIY Team have announced that the E3 Flasher nows officially supports PS3 dual-booting alongside news of their upcoming E3 Move Suit below, as follows:

E3 Flasher Download Link:

Well, you will need to download E3 Flasher to proceed downgrading or booting your playstation 3.

 E3 Flasher Supporting Dual boot

E3 Flasher Booting Steps and Instructions:

1: Fast dual boot is now available. There are no brick risk any more! (Cause the operations are done on E3 onboard NOR instead of PS3 NOR flash)

All E3 flasher limited and E3 nor flasher can operate this way, click here to download file. We’re now producing 1000 more pieces of E3 flasher Limited version for those interested on dual boot.

2: E3 TBJB2CFW CHECKOFF available , the E3 flasher downgraded console can also works with TBJB2, click here to download file and enjoy new game.

Please note you still need the TBJB2 device. You can install this CFW on PS3 with recovery MODE or re-downgrade PS3 with this file, instead of STEP1 PS3UPDAT.PUP file.

3: E3 MOVE SUIT, the first third-party PS3 MOVE controller suite will be released soon, it will be fully compatible with all PS3 fat and slim, there will be many available colors, more comfortable design and more economic price to bring you a better enjoyment. You have a better choice now to add to the original accessories.

The E3 MOVE SUIT include 4 parts: E3 Navigation Controller, E3 motion controller, E3 Camera, and E3 camera stand.

 E3 Flasher Supporting Dual boot

Posted by admin - January 6, 2012 at 7:46 am

Categories: E3 Flasher   Tags: , , , , , , , , , , , , , , , , , , ,

.